Disassembly Procedures - Epson Stylus NX105 Service Manual

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300

4.2 Disassembly Procedures

For disassembling each unit, refer to the pages in the following flowchart.
Start
" 4.3.4 Scanner Stand / " 4.3.1 Paper Support
Cover Wire " (p60) Tray " (p58)
" 4.4.1 Panel Unit " (p64) " 4.3.5 Scanner Unit " (p62)
" 4.3.6 Middle Housing "
(p63)
" 4.5.6 CR Motor/
" 4.5.3 Hopper " (p72)
Driven Pulley " (p75)
" 4.4.2 Main Board "
" 4.5.7 Ink System " (p77)
(p65)
" 4.5.6 CR Motor/ " 4.5.8 PF Motor "
Driven Pulley " (p75)
(p82)
" 4.5.7 Ink System " (p77)
" 4.5.4 PF Encoder/
" 4.5.1 Printhead " (p68)
PF Scale " (p73)
" 4.5.9 Main Frame "
" 4.5.11 CR Unit " (p87)
(p84)
" 4.5.5 EJ Roller/
" 4.5.10 Upper Paper
EJ Frame Assy "
Guide " (p86)
(p73)
" 4.5.12 PF Roller "
(p90)
" 4.5.13 LD Roller/
ASF Unit " (p91)
" 4.5.14 Waste Ink Pads "
(p93)
DISASSEMBLY/ASSEMBLY
" 4.3.3 Document Cover/ " 4.3.2 Stacker Assy "
ASF Cover " (p59) (p58)
" 4.5.2 CR Scale " (p71)
" 4.5.1 Printhead " (p68)
" 4.5.13 LD Roller/
ASF Unit " (p91)
Figure 4-1. Disassembling Flowchart
Disassembly Procedures
" 4.5.4 PF Encoder/
" 4.5.5 EJ Roller/ EJ
PF Scale " (p73)
Frame Assy " (p73)
You need to remove the parts/units shown in dashed line box if they exist on
the way to the target part/unit.
" 4.3.3 Document Cover/
ASF Cover " (p59)
" 4.6.1 Upper Scanner
" 4.4.3 Power Supply
Unit " (p66) Housing " (p96)
" 4.6.2 Scanner Carriage
Unit " (p97)
Revision A
" 4.6.3 Scanner Motor
Unit " (p99)
57
Confidential