Epson Stylus NX105 Service Manual page 61

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300
Cover Wire
1. Open the Scanner Unit.
2. Release both the hooks in the direction of arrow, and remove the Cover Wire.
Scanner Unit
Cover Wire
Figure 4-9. Removing the Cover Wire
When installing the Scanner Stand, secure the shorter leg of the
Scanner Stand Spring to the groove on the Scanner Unit, and secure
the longer to the hook of the Scanner Stand as shown below.
Scanner Stand
Figure 4-10. Installing the Scanner Stand
DISASSEMBLY/ASSEMBLY
Hook
Scanner Stand Spring
Groove
Hook
Removing the Housing
Make sure not to catch the Scanner Motor Cable and the
Scanner FFC with the Cover Wire.
When installing the Cover Wire, insert the rib B so as to let the
rib A of the Cover Wire under the Panel FFC.
Panel FFC
Scanner FFC
Cover Wire
Figure 4-11. Installing the Cover Wire
Revision A
Scanner Motor Cable
Rib A
Rib B
61
Confidential