Epson Stylus NX105 Service Manual page 89

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300
Install the FFC according to the following procedures.
1. Lead the FFC through the hole of the Holder FFC and
Main Frame.
Holder FFC
Figure 4-84. Installing the CR Unit (3)
2. Secure the FFC with rib A and rib B.
Figure 4-85. Installing the CR Unit (4)
DISASSEMBLY/ASSEMBLY
FFC
Hole
Rib B Rib A
Disassembling the Printer Mechanism
3. Fold back the FFC and secure it with rib A again.
Rib A
Figure 4-86. Installing the CR Unit (5)
4. Fold back only the Head FFC and secure it with rib A again.
5. Connect the FFC to the Main Board (J8, J9).
Head FFC
Rib A
Figure 4-87. Installing the CR Unit (6)
Whenever the CR Unit is removed/replaced, the required
adjustments must be carried out.
• Chapter 5 " ADJUSTMENT" (p.100)
Revision A
FFC
FFC
89
Confidential