Epson Stylus NX105 Service Manual page 35

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300
Occurrence timing
Detailed phenomenon
CR position
• Power on
When turning on the power, the Carriage
cannot get out of home position.
• Anywhere
TROUBLESHOOTING
Table 3-2. Check point for Fatal error according to each phenomenon
Defective
unit/part name
1. Check if the Cap Assy and the Lever Cleaner are
assembled correctly.
Ink System
2. Check if the Spring Cleaner Case does not come off in the
Cap Assy.
Spring
Cleaner Case
Error Indications and Fault Occurrence Causes
Check point
1. Reassemble the Cap Assy and Lever Cleaner
Cap Assy
Lever Cleaner
2. Reassemble the Spring Cleaner Case correctly.
Cap Assy
Revision A
Remedy
correctly.
Confidential
35