Epson Stylus NX105 Service Manual page 78

Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300
6. Pull out the Waste Ink Tube through the rear of the Cap Assy, and remove the
Cap Assy.
Figure 4-52. Removing the Cap Assy (4)
Pump Assy
1. Pull out the Waste Ink Tube together with the Holder Tube through the Waste
Ink Cover.
2. Release the Waste Ink Tube from the hook of the ASF Unit.
Figure 4-53. Removing the Pump Assy (1)
DISASSEMBLY/ASSEMBLY
Cap Assy
Point A
Ink Tube
Hook Ink Tube
Holder Tube
ASF Unit
Point D Duct Tube End
Disassembling the Printer Mechanism
3. Release the two hooks, and remove the Pump Assy from the Lower Housing.
Pump Assy
Hook
Figure 4-54. Removing the Pump Assy (2)
When installing the Cleaner Lever Spring, insert the longer
end of the spring into the Lower Housing, and secure it to the
protrusion A of the Cleaner Lever attached through the hole
of the Lower Housing. (See Fig.4-49.)
Revision A
Pump Assy
78
Confidential