Assembly And Adjustments; On/Off Trigger Switch - Craftsman evolv 320.17263 Operator's Manual

_, WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual, as well as knowledge of the
project you are attempting. Before use of this product, familiarize yourself with all
operating features and safety rules.
ASSEMBLY AND ADJUSTMENTS (Fig.2)
A_, WARNING: Remove the
hammer drill from the carton
and examine it carefully. Do
not discard the carton or any
packaging material until all
parts are examined.
_1, WARNING: Before plugging
your hammer drill into the
power supply, always check
to make sure it is not in the
"Lock-on" position (depress
and release the trigger switch).
Failure to do so could result
in accidental starting of your
hammer drill, resulting in
possibly serious injury. Do not lock the trigger on jobs where your hammer drill
may need to be stopped suddenly.
INSTALLING THE AUXILIARY HANDLE AND DEPTH GAUGE
1. Slide the depth gauge into
Fig. 3
the mounting hole located on
the grip clamp, depth gauqe
2. Slide the grip clamp and the
auxiliary handle onto the hammer .................... _
drill collar and secure it by
turning the handle unit it is tight.
3. The handle can be rotated
180 ° so that the depth gauge
can be used on either side of
the hammer drill housing.
clamp
auxiliary handle
mounting hole
_lk WARNING: The handle must be held firmly while the hammer drill is in use.
Do not hold the front metal housing while using the hammer drill.
ON/OFF TRIGGER SWITCH (Fig.4)
Turn your hammer drill on by pressing the trigger switch; release the switch to it
I
17263Manual Revised 09-0709 Page 10