Specifications - Craftsman evolv 320.17263 Operator's Manual

ID]=_.'_o_l[e_]
KNOW YOUR HAMMER DRILL (Fig. 1)
Before attempting to use this hammer drill, familiarize yourself with all its
operating features and safety requirements.
_, WARNING: Do not allow familiarity with your hammer drill to make you
careless. Remember that a careless fraction of a second is sufficient to inflict
severe injury.
Fig. 2
Depth gauge
Drill chuck
Auxiliary handle
Hammer/Drill seletion switch
_! Forward/Reverse switch
i j Lock on button
Switch
PRODUCT SPECIFICATIONS
Motor 120V~60Hz, 6A
No Load Speed 0-2600 (RPM)
Hammer 0-46800 (BPM)
Keyed Chuck 1/2"
Maximum hammering capacity 1/2" in steel
3/4" in concrete
1-1/4" spade bit in soft wood
7/8" spade bit in hard wood
2" hole saw in soft wood
1" hole saw in hard wood
Weight 4.41bs (2kgs)
17263 Manual Revised 09-0709 Page 9