Unpacking - Craftsman evolv 320.17263 Operator's Manual

A_, WARNING: Your hammer drill should never be connected to the power
source when you are assembling parts, making adjustments, installing or
removing bits, cleaning it or when it is not in use. Disconnecting the hammer drill
will prevent accidental starting, which could cause serious personal injury.
When unpacking the box, do not discard any packing materials until all of the
contents are accounted for:
1. Carefully lift the drill out of the carton and place it on a stable, flat surface.
2. Open the color box to locate the following:
• 1 Hammer drill
• Auxiliary handle
• Depth gauge
• Chuck key
• Case
• Operator's manual
3. Inspect the items carefully to make sure that no breakage or damage has
occurred during shipping. If any of the items mentioned is missing, (refer
to "PARTS LIST" illustration), return the drill to your nearest Sears store or
Craftsman outlet to have the drill replaced. Carefully remove the tool and any
accessories from the box. Make sure that all items listed in the packing list
are included.
_, WARNING: If any part is broken or missing, do not attempt to assemble the
hammer drill, plug in the power cord, or operate the hammer drill until the broken
or missing part has been replaced. Failure to do so could result in possible
serious injury.
CARTON CONTENTS/LOOSE PARTS (Fig. 1}
Fig.
Hammer Drill (Chuck key
included)
Auxiliary handle
Depth gauge 1
Case 1
17263 Manual Revised 09-0709 Page 8