Assembly - Craftsman 315.101160 Operator's Manual

KNOW YOUR DRILL
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
AUXILIARY HANDLE
Your drill is equipped with an auxiliary handle for ease of
operation and to prevent loss of control.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE)
Your drill has a direction of rotation (forward/reverse)
selector located above the variable speed switch for
changing the direction of bit rotation.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release
the drill bit in the chuck jaws.
LEVELS
Levels are located on the top and end of the motor
housing to help keep the drill bit level during use.
UNPACKING
This product has been shipped completely assembled.
n Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-932-3188 for assistance.
PACKING LIST
1/2 in. Drill with Auxiliary Handle Assembly
Carrying Case
Operator's Manual
FEATURES
LIVE TOOL INDICATOR
The live tool indicator is located on the handle of the
drill and indicates that the tool is connected to a power
supply.
LOCK-ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.
SPINDLE LOCK
The spindle lock keeps the chuck from turning while
installing and removing bits.
VARIABLE SPEED SWITCH
The variable speed switch delivers higher speed with
increased pressure and lower speed with decreased
pressure.

ASSEMBLY

WARNING
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
WARNING
create accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
assembly is complete. Failure to comply could result
in accidental starting and possible serious injury.
9
: If any parts are missing do not operate
: Do not attempt to modify this tool or
Do not connect to power supply until