Repeating Defects Appear On Prints - Lexmark MX710 User Manual

Troubleshooting
Action
Step 5
a
Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in
its original wrapper until you use it.
b
Resend the print job.
Do print irregularities still appear?
Step 6
Replace the imaging unit, and then resend the print job.
Do print irregularities still appear?

Repeating defects appear on prints

Action
Step 1
a
Replace the imaging unit if the distance between the defects is equal
to any of the following:
•
47.8 mm (1.88 in.)
•
96.8 mm (3.81 in.)
•
28.5 mm (1.12 in.)
b
Resend the print job.
Do repeating defects still appear on prints?
Step 2
a
Replace the fuser if the distance between the defects is equal to either
of the following:
•
94.25 mm (3.71 in.)
• 95.2 mm (3.75 in.)
b
Resend the print job.
Do repeating defects still appear on prints?
Yes No
Go to step 6. The problem is solved.
Contact customer The problem is solved.
support at
http://support.lexmar
k.com or your service
representative.
Yes No
Go to step 2. The problem is solved.
Contact customer The problem is solved.
support.
309