Lexmark MX710 User Manual page 277

Troubleshooting
Load Manual Feeder with [paper size] [paper orientation]
Try one or more of the following:
•
Load the feeder with the correct size of paper.
•
From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear
the message and continue printing.
•
From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
•
Cancel the print job.
Load Manual Feeder with [paper type] [paper size] [paper orientation]
Try one or more of the following:
•
Load the feeder with the correct size and type of paper.
•
From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded to clear
the message and continue printing.
•
From the printer control panel, touch Automatically select paper to use the paper loaded in the tray.
•
Cancel the print job.
Maintenance kit low [80.xy]
You may need to order a maintenance kit. For more information, contact customer support at
http://support.lexmark.com
continue printing.
Maintenance kit nearly low [80.xy]
For more information, contact customer support at
necessary, touch Continue to clear the message and continue printing.
Maintenance kit very low, [x] estimated pages remain [80.xy]
You may need to replace the maintenance kit very soon. For more information, contact customer support at
http://support.lexmark.com
continue printing.
Memory full [38]
Try one or more of the following:
•
From the printer control panel, touch Cancel job to clear the message.
•
Install additional printer memory.
Memory full, cannot print faxes
From the printer control panel, touch Continue to clear the message without printing. Held faxes attempt to print after
the printer is restarted.
or your service representative. If necessary, touch Continue to clear the message and
http://support.lexmark.com
or your service representative. If necessary, touch Continue to clear the message and
or your service representative. If
277