Customizing Copy Settings - Lexmark MX710 User Manual

Copying
3
Navigate to:
Copy to > select the tray that contains transparencies > Copy It
If there are no trays that contain transparencies, then navigate to:
Manual Feeder >
4
Load transparencies into the multipurpose feeder, and then touch Copy It.
Copying on letterhead
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Copy > Copy from > select the size of the original document >
4
Navigate to:
Copy to > select the tray containing the letterhead > Copy It
5
If there are no trays that support letterhead, then navigate to:
Manual Feeder > select the size of the letterhead > Letterhead
6
Load the letterhead faceup, top edge first into the multipurpose feeder, and then touch Copy It.

Customizing copy settings

Copying to a different size
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Copy > Copy from > select the size of the original document >
4
Navigate to:
Copy to > select a new size for the copy >
> select the size of the transparencies > > Transparency >
> Copy It
100