Lexmark MX710 User Manual page 200

Understanding the printer menus
Fax Log Settings
Use
Transmission Log
Print log
Do not print log
Print only for error
Receive Error Log
Print Never
Print on Error
Auto Print Logs
On
Off
Log Paper Source
Tray [x]
Manual Feeder
Logs Display
Remote Station Name
Dialed Number
Enable Job Log
On
Off
Enable Call Log
On
Off
Log Output Bin
Standard Bin
Bin [x]
Speaker Settings
Use
Speaker Mode
Always Off
On until Connected
Always On
Speaker Volume
High
Low
To
Enable printing of a transmission log after each fax job.
Note: Print log is the factory default setting.
Enable printing of a receive error log following a receive error.
Note: Print Never is the factory default setting.
Enable automatic printing of fax logs.
Notes:
•
On is the factory default setting.
•
Logs print after every 200 fax jobs.
Specify the source of the paper used for printing logs.
Note: Tray 1 is the factory default setting.
Specify whether printed logs display the dialed number or fax name returned.
Note: Remote Station Name is the factory default setting.
Enable access to the Fax Job log.
Note: On is the factory default setting.
Enable access to the Fax Call log.
Note: On is the factory default setting.
Specify the bin where fax logs are printed.
Note: Standard Bin is the factory default setting.
To
Specify the mode of the speaker.
Notes:
•
"On until Connected" is the factory default setting. A sound is issued until the
fax connection is made.
•
Always On turns the speaker on.
•
Always Off turns the speaker off.
Control the volume setting.
Note: High is the factory default setting.
200