Solving Problems; Status And Error Messages - Epson AcuLaser CX11NF Basic Manual

Solving Problems

Your CX11N displays status and error messages on its LCD screen. This chapter tells
you how to respond to these and troubleshoot other problems you may encounter.

Status and Error Messages

Not every message displayed on the LCD screen indicates a problem; some just
inform you of the current CX11N status. If you see a
multiple errors have occurred.
Message
C/M/Y/K Toner Low
Calibrating Printer
Cancel All Print Job
Cancel Print Job
Can't Print
Check Transparency
Action
The indicated toner cartridge is near the end of its service life.
Make sure you have a replacement toner cartridge ready. See
page 97 to order a toner cartridge.
The product automatically calibrates itself, and will finish in about
one minute, depending on the status of the CX11N. While this
message is displayed, do not open any covers or turn off the
CX11N.
This message appears when the y Cancel button has been
pressed down for more than three seconds. The CX11N is
canceling all print jobs in memory, including jobs currently being
received or printed.
This message appears when the y Cancel button has been
pressed and released within three seconds. The CX11N is
canceling the current print job.
The CX11N has received print data from an unintelligible printer
driver. Make sure you are using the appropriate printer driver.
This is a mismatch between the loaded paper or transparencies
and the printer driver setting for your paper or transparencies.
Paper may be jammed in the MP tray (E). To clear the jam, see
page 123.
to the left of an error message,
Solving Problems
8
99