Cleaning The Cx11N - Epson AcuLaser CX11NF Basic Manual

11. Slide out and flip open the output tray extension, if necessary.
12. Slowly push down the scanner to its original position.

Cleaning the CX11N

If the CX11N's outer case is dirty or dusty, turn off the CX11N and clean it with a
soft cloth moistened with mild detergent.
Caution:
Never use alcohol or paint thinner to clean the CX11N; these chemicals can damage
the components and the case. Be careful not to get water on the CX11N mechanisms
or any electrical components.
To clean other parts of the CX11N, see these sections:
■
"Cleaning the Pickup Roller" on page 92
■
"Cleaning the Print Head" on page 93
■
"Cleaning the Exposure Window and Document Table" on page 95
■
"Cleaning the ADF Pickup Rollers (CX11NF Only)" on page 96
Cleaning the CX11N
91