Consumable Replacement Messages - Epson AcuLaser CX11NF Basic Manual

Consumable Replacement Messages

When you see the following messages in the LCD screen or in the EPSON Status
Monitor 3 window, you need to replace the indicated unit. You can continue printing
for a short time after a message appears, but Epson recommends early replacement to
maintain print quality and extend the life of your product.
LCD screen message Description
Worn Photoconductor The photoconductor is near the end of its service life.
Worn Fuser
Worn uuuu Dev Unit
Note:
To clear the message, press the
from Printer settings, then select Clear All Warnings.
The CX11N stops printing if the worn consumable might damage the CX11N. You
must replace the consumable product to continue.
If a consumable product reaches the end of its service life, the product stops printing
and displays the following messages on the LCD screen or in the EPSON Status
Monitor 3 window.
LCD screen message
Replace Toner uuuu
Replace Photocondctr
1 The letters C, M, Y, and K appear in this position, indicating the color of the empty toner
cartridge.
2 Even if this message is displayed in the LCD screen, you can continue to print for a short time by
x B&W Start
pressing the
LCD screen changes from
Messages appear for one consumable product at a time. After replacing a part, check
the LCD screen for replacement messages for other parts.
Replace the photoconductor with a new one.
The fuser has reached the end of its service life.
Contact Epson as described on page 128.
The developer has reached the end of its service life.
Contact Epson as described on page 128.
Setup button on the control panel, select Reset
Description
1
The indicated toner cartridge is empty.
2
The photoconductor is at the end of its service life.
x Color Start
or
Replace Photocondctr
button on the control panel. The message in the
Worn Photoconductor
to
Consumable Replacement Messages
.
81