Adjusting The Contrast; Enlarging Or Reducing The Copy Size - Epson AcuLaser CX11NF Basic Manual

Adjusting the Contrast

You can adjust the image contrast by selecting from 7 levels (–3 to 3). The higher the
level, the greater the contrast. When you lower the contrast, the difference in dark and
light areas decreases. The default level is 0.
1. Make sure the product is in Copy mode. If not, press the
2. Press the
The current Contrast value is highlighted.
3. Press the
contrast.
Adjusting the Color
You can adjust the image colors by selecting from 7 levels (–3 to 3) for red (R), green
(G), and blue (B). The higher the level, the richer the color. The default level is 0.
Note:
RGB adjustment is available only for color copies.
1. Make sure the product is in Copy mode. If not, press the
2. Press the
G, or B value is highlighted.
3. Press the
the color strength.

Enlarging or Reducing the Copy Size

You can adjust the copy size by selecting a specific zoom ratio or a specific percentage
for enlargement or reduction (25 to 400%). The default zoom ratio is 100%.
1. Make sure the product is in Copy mode. If not, press the
2. Press the
highlighted.
38
Copying
button several times to select
d
button to increase the contrast. Press the
r
or button several times to select a color (
u d
button to increase the color strength. Press the
r
or button several times to select
u d
.
Contrast
button to decrease the
l
, , or
R G
l
. The current Zoom value is
Zoom
button.
Copy
button.
Copy
). The current R,
B
button, to decrease
button.
Copy