Epson AcuLaser CX11NF Basic Manual page 66

The following table shows the settings and options for each scan mode.
Scan modes
Automatic scan
Manual scan
Scanning
Follow these steps to scan:
1. Connect the CX11N to your computer with a USB cable or a network cable as
described in your Setup Guide.
2. Turn on the CX11N. Place your originals on the document table (see page 15) or
in the Auto Document Feeder (CX11NF only; see page 17).
Caution:
Make sure the transportation lock on the left side of the document table is set in
the unlock position.
3. Press the
4. Press the
button.
r
When you select
your scanning program, scan your document, and close your scanning program.
The CX11N returns to the Print mode.
When you select
screen. Press the
the button.
r
5. Press the
6. Press the
EPSON Scan starts scanning. When the scanning is complete, remove your
originals from the document table or the Auto Document Feeder.
If you need to cancel scanning, press the
66
Scanning
Available settings
File Format
File Format
Paper Size
button.
Scan
or button to select either
u d
, you see a message on your computer screen. Select
Local PC
Network PC
or button to select your network computer, and then press
u d
or button to select a file format.
l r
or
B&W Start
x x
Local PC
, the network computer name appears in the LCD
button on the control panel.
Color Start
button.
Cancel
y
Items
PDF, TIFF, JPG
PDF, TIFF, JPG
A4, B5, Letter, Legal
or , then press the
Network PC