Craftsman 486.240383 Owner's Manual page 7

5_
8,
Place assembled lower hopper tubes into
bottom of hopper bag as shown in figure 14.
Assemble the upper and lower hopper tube
ends together with two 3/8" x 3/4" hex bolts,
(inside) and 3/8" hex lock nuts (outside). See
figure 14, Do not overtighten to allow for pivot.
8. Assemble the frame strap to the lower hopper
frame° Secure with !/4" x 1-1/4" hex bolts and
1/4" lock nuts, See figure 16o
LOWER HOPPER TUBE
UPPER
=ER
TUBE
!8" HEX LOCK NUT
(OUTSIDE)
t
- ---_ 3f8" x 3/4" HEX BOLT
LOWER HOPPER TUBE _J_ (INSIDE)
HOPPER BAG
BOTTOM
FIGURE 16
1f4" x 1-1/4" HEX BOLT
(OUTSIDE)
FRAME STRAP
FIGURE 14
7_
Assemble the bag frame strap (bottom) and bag
retainer (top) to the front edge of bag bottom.
Place the bag retainer on top and frame strap
on bottom Secure with six #t0 x 5/8" slotted
screws, and #10-32 hex lock nuts. See figure t5.
#10 x 5/8" SCREW
FRONT EDGE OF BAG
FRAME_S]:RAP ./
9, Secure the bag corners over lower hopper tube
by snapping the flap to bag bottom on both
sides, See figure 17,
,SNAP
FIGURE 15 FIGURE 17
7