Advertisement
Available languages
Available languages
Contents
of Carton
1 - Inflator equipped with hose and
universal valve adapter
1 - Accessories
Kit
1-
Inflator Needle
1 - Extension Nozzle
1 - Nigh Flow Inflator/Defiator
adapter body with three
nozzles and seal ring
To Remove
inflator
from
Carton
1.
Grasp handle and lift the inflator
out of the carton.
2.
Remove all packaging from
inflator and discard.
NOW TO SET UP YOUR UNIT
1,
The cord set and plug with this
Location
of the inflator
Locate the inflator in a clean, dry
and well ventilated area. The inflator
pump and housing are designed
to allow for proper cooling= The
ventilation openings on the inflator
are necessary to maintain proper
operating temperature.
Do not place
rags or other containers on or near
these openings=
GROUNDmNG
INSTRUCTIONS
Risk of Electrical
Shock.
In the
event of a short circuit,
grounding
reduces
the risk of shock by
providing
an escape wire for the
electric
current. This inflator
must
be propermy grounded.
The inflator is equipped with a cord
having a grounding wire with an
appropriate
grounding
plug (see
following illustrations).
The ptug must
be used with an outlet that has been
installed and grounded in accordance
with all local codes and ordinances.
unit contains a grounding
pin.
This plug MUST be used with a
grounded outlet.
IMPORTANT: The outlet being used
must be installed and grounded in
accordance
with alI local codes and
ordinances.
2.
Make sure the outlet being used
has the same configuration
as the grounded plug. DO
NOT USE AN ADAPTER, See
illustration.
Grounded
Outlets
Groundling Pin
3.
4.
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
If these grounding instructions
are not completely
understood,
or if in doubt as to whether the
inflator is properly grounded,
have the installation checked by
a qualified electrician.
9- ENG
A10087
Advertisement
