Craftsman 919.152361 Owner's Manual page 12

How to use High Flow Inflator/
Deflator Adapter Body
1. Place the universal valve adapter
over high flow inflator/deflator
adapter body as shown.
5.
Insert nozzle into inflatable and
then start inflator, see "How to
Start" paragraph.
Press lever on universal valve
adapter down to Iock in piace.
NOTE: if the universal valve
adapter will not lock in place pulI
it away from the adapter body so
it is not flush.
not flush
NOTE: if inflatable is not getting
firm enough, place thumb over the
"deflation" outlet to aiIow air to go
directly into the inflatable.
Choose nozzle to be used to
inflate or deflate. NOTE: The sea!
ring may be used with any of the
nozzles to prevent air from leaking
out of inflatables with very large
air inlets.
The high flow inflate/deflate
adapter body attachment has an
"inflation" outlet and "deflation"
outlet. Attach the nozzle to
the preferred outlet. NOTE:
"Inflation" and "Deflation" are
marked at outlets.
Risk of Bursting,
DO NOT over-
inflate, Keeping thumb over
""Deflation" outlet coumd cause
inflatable to over-inflate° Use
caution when pmacing thumb over
""Deflation" outmet,
Nozzle
attached to
"deflation"
outlet
A10087 12-ENG