Moveable T-Slot Table Format - Vision 1612 User Manual

Chapter 1
(Figure 1.1) Moveable T-slot table format.
Shown here is the top view of the Vision 1624. The Vision 1612 has a similar design.
11. Engraving Motor
5. Gantry Assembly
1. Table Base Plate
12. Quick-Lock Vise
(Figure 1.1a) Series 3 T-slot table format. Shown here is front angled view of the
Series 3 Vision 1624.
4. Y-Axis Lead Screw
(under metal cover)
Page 8
4. Y-Axis Lead Screw
(under metal cover)
6. Carriage Assembly
13. Spindle Housing
10. Material Guides
2. Y-Axis Linear Rails
1. Table Base Plate. This is the large flat plate upon which everything else is mounted.
All mechanical alignments are referenced to this plate, so the space upon which you place the
engraving table must be a reasonably level surface.
2. Y-Axis Linear Rails. Mounted on the table base plate are stainless steel rails with sealed
bearings, which allow the motion of the T-slot table in the Y-axis direction.
6. Carriage Assembly
11. Engraving Motor
3. T-Slot Table
(under metal cover)
8. Y-Axis Stepper Motor (underneath)
7. 25 Pin Breakout
Box (underneath)
9. X-Axis Stepper
Motor
3. T-Slot Table
2. Y-Axis Linear Rails
5. Gantry Assembly
(under metal cover)
8. Y-Axis Stepper Motor
(under metal cover)
9. X-Axis Stepper Motor
(under metal cover)
1. Table Base Plate
7. 25 Pin Breakout
Box (under cover)