Liability Statement - Vision 1612 User Manual

Copyright 2008 Vision Engraving & Routing Systems
(A Division of Western Engravers Supply, Inc.)
All Rights Reserved
This publication is protected by copyright, and all rights are reserved. No part of this manual may be reproduced or
transmitted by any means or in any form, without prior written consent from Vision.
Limits of Liability / Disclaimer of Warranty for this Table Manual:
The information contained within this manual has been carefully checked and is believed to be accurate, however,
Vision makes no representations or warranties for this manual, and assumes no responsibility for inaccuracies, errors,
or omissions that may be contained within this manual. In no event shall Vision be liable for any loss of profit including
(but not limited to) direct, indirect, special, incidental, consequential, or other damages resulting from any defect or
omission in this manual, even if previously advised of the possibility of such damages.
In the interest of continued product development, Vision reserves the right to make improvements to this manual and
the products it describes at any time, without notice or obligation.
Vision Engraving and Routing Systems Warranty For The Vision Table:
Vision Computerized Engraving and Routing Systems (Vision) warrants that for a period of two (2) years from the date
of shipment to the original purchaser of either a Phoenix, or Vision Engraving System (the System) that the System
will be free from defects in material and workmanship under normal use and service. Upon written notification we will
transfer the remaining warranty to a new customer. This warranty shall cover all elements except for items covered by
separate manufacturer's warranties and consumable items. "Consumable" items include, but shall not be limited to,
belts, brushes, lubricants, and cutters furnished with the System, for which no warranty is provided.
In the event a defect is discovered during the warranty period, within thirty days of discovery, but in no event later
than the last day of the warranty period as described above, the user shall contact Vision for instructions regarding
disposition of the problem. Vision shall, at its option, either (1) repair the affected product with new or refurbished
parts or (2) provide a replacement. Any incidental costs, including the cost of shipment from the user's location to the
point of repair and return, and any installation performed by the user, shall be at the expense of the user.
This warranty covers normal use only and shall be void in the event that the System is altered or modified without
authorization by Vision, or is subject to abuse, neglect, or other misuse by the user.
The warranties for Third-Party Hardware and Third-Party Software shall run directly from the manufacturers of
such hardware and software to the user. Vision makes no warranties, express or implied, with regard to Third-Party
Hardware or Third-Party Software. This includes NSK spindles, high frequency spindles and router motors.
Vision does not warrant any product, component, or part not manufactured by Vision that was not supplied by Vision.
(Third-party items, including but not limited to software, are subject to their own manufacturers warranties.) Vision
does not warrant defects caused by a failure to provide a suitable environment for the system, by unauthorized
attachments, by modifications or repairs other than by Vision, by use of the System for other than its original intention,
or by other misuse or abuse of the System.
Lapse of Warranty
If an extended warranty is purchased after the original warranty expires, the Vision machine must be in full working
order for the extended warranty to be purchased for that machine. If the machine is not operational and the customer
would like to purchase an extended warranty, the machine must first be repaired at a 20% discount for the repair work.
If the machine is in good operating condition the customer can purchase the extended warranty. If the machine has
problems, it must be repaired at the customers' expense. If the customer then chooses to buy an extended warranty a
20% credit on the repair parts will be issued.
The above and foregoing is the only warranty of any kind, either express or implied, by statute or otherwise, regarding
the System, its fitness, quality, merchantability, or otherwise. Any warranties implied by law are hereby expressly
disclaimed. No oral or written information or advice given by Vision, its Dealers, Distributors, Agents, or Employees
shall create a warranty or in any way increase the scope of this warranty. Neither Vision nor anyone else who has been
involved in the creation, production, or delivery of the System shall be liable for any direct, indirect, consequential,
or incidental damages (including damages for loss of business profits, business interruption, loss of business
information, and the like) arising out of the use of, or inability to use, the product.
Any software supplied by Vision in conjunction with the purchase of the System for use therewith shall be governed by
its own separate software license and warranty agreement.
For Warranty Service Call: (602) 439-0700
Page 4