Table of Contents
Advertisement
Friedrich PTAC Accessories
NEW CONSTRUCTION ACCESSORIES
MODEL NUMBER
WALL SLEEVE G-90 zinc coated steel is prepared in an eleven-
step process, then electrostatically coated with a polyester finish
and cured in an oven for exceptional durability. The wall sleeve
PXWS
is insulated for thermal efficiency. 16" High x 42" Wide x 133⁄4"
Deep.
GRILLE, standard, stamped aluminium, anodized to resist
PXGA
chalking and oxidation.
PXAA
ARCHITECTURAL GRILLS that consist of heavy-gauge
6063-T5 aluminium alloy:
PXDB
Clear, extruded aluminium or dark bronze acrylic enamel
PXSC
Also available in custom colors.
CONDENSATE DRAIN KIT Attaches to the bottom of the wall
sleeve for internal draining of condensate or to the rear wall sleeve
PXDR10
flange for external draining. Recommended on all units to remove
excess condensate. Packaged in quantities of ten.
DEEP WALL SLEEVE EXTENSION A four inch deep anodized
aluminium extension that attaches to the outside of the wall sleeve
PXWE
when the wall is greater than eleven inches thick (91⁄2" when a
subbase is used, 10 inches when a lateral duct is used).
DECORATIVE SUBBASE Provides unit support for walls less
than six inches thick. Includes leveling legs, side filler panels
PXSB
and mounting brackets for electrical accessories. Accepts
circuit breaker, power disconnect switch, or conduit kit.
CONDUIT KIT WITH JUNCTION BOX Hard wire conduit kit
with junction box for 208/230V and 256V units (subbase not
required). Kit includes a means of quick disconnect for easy
PXCJ
removal of the chassis. *Required for 265V installations.
PXDC
RT2
22
DESCRIPTION
DESK CONTROL KIT A field installed kit which allows the
unit to be turned on or off from a remote central station via
a 24V interface.
DIGITAL REMOTE THERMOSTAT A Honeywell wall
mounted remote thermostat. Requires proper P-Series
chassis.
920-087-02 (9-03)
PHOTO
PXWS
PXDB
PXDR10
PXWE
PXSB
PXCJ
PXDC
MODE
FAN
RT2
Hide quick links:
Advertisement
Table of Contents
