Hiding Panels Automatically - Brother BES Monogramming Suite Instruction Manual

22 Pacesetter BES Monogramming Suite
Instruction Manual
4 Do one of the following:
 To increase the zoom, continue clicking and dragging the
flexible box.
 From the Zoom toolbar, click on the down arrow under
the Zoom icon, and use the Zoom tool settings to zoom
back out.
Additional options on the Zoom Toolbar:
When you click on the down arrow underneath the Zoom Tool,
you will see an option menu. You can choose from any of the
following options on this menu:
• Zoom In to make your design larger.
• Zoom Out to make your design smaller.
• To Fit to make the whole design the size of the design
window.
• To Selection to zoom to the size of the currently selected
embroidery segment, or set of embroidery segments if more
than one is selected.
• 1:1 to see the design at the actual size.

Hiding Panels Automatically

To increase the amount of space for your design window, you
can set the Properties and Sequence View panels to the Auto
hide mode. When Auto hide is on, the panel will only be visible
while the mouse is over it; as soon as you remove the mouse,
the panel will collapse to a narrow sidebar.
To turn on Auto hide for these panels, click on the small push-
pin icon at the top-right of the panel. When the panel is in
Auto hide mode, the small push-pin will be on its side, like this:
. Now, whenever you move the mouse to another part of the
screen, the panel will be hidden.
To turn Auto hide off, click on the icon again.