Adding Decors To A Monogram - Brother BES Monogramming Suite Instruction Manual

Adding Decors to a Monogram

In the Monogram Designer dialog, you can add small decorative
designs, called decors, to embellish your Monogram. There are
eight possible positions where you can place decors in the
dialog preview panel; these are indicated by the small
placeholder graphics, which look like this:
Note that both Decors and Frames can be added to the same
Monogram design.
To add Decors to your Monogram:
1 Click on the placeholder position where you wish to place
the first decor.
The column on the right of the dialog changes to show a list
of available decors.
2 Click on the decor you want to add.
The selected decor appears in the monogram preview panel.
3 Adjust the decor by doing the following (these are optional):
 Change the size of the decor by typing a percentage into
the scale box.
Creating & Decorating Monograms 43
.