Trim Settings - Brother BES Monogramming Suite Instruction Manual

Positive slant of 20 above, negative slant of 20 below.
To change slant settings:
1 Select the text object(s) that you want to alter.
2 In the Text area of the Properties panel, select the Slant
field.
3 Enter the slant value you want to use. To slant your lettering
to the left, enter a negative value. To slant your lettering to
the right, enter a positive value.
4 Click Apply to save your changes.
You see your text altered accordingly.

Trim Settings

Use the Trims field of the Properties Panel to control how trims
are applied to lettering segments.
Note that not all machine format support trims. If you save your
design in a format that does not support trims, the trim will not
occur on your machine during sew-out.
You can choose from the following options:
• Always: Inserts a trim between all letters in the segment.
• Never: No trims are placed between letters in the segment
• Auto: A trim is placed between the letters, if the distance
between them exceeds a certain set value.
Editing Designs 61