Troubleshooting; No Dial Tone; Does Not Ring; Flickering Lcd - Polycom SoundStation2 User Manual And Administrator Manual

Troubleshooting

No Dial Tone

The telephone cable must be plugged into an analog
telephone jack. If the dial tone is not heard, verify the
following:
► Check that the console is opera-
tional.

Does Not Ring

Check that the ringer is not turned off.
See "Ring Type", page 12.

Flickering LCD

If your screen appears to flicker, it
may be because you are using a cer-
tain type of florescent lighting in your

Keypad Input Doesn't Register

This could happen if you enter infor-
mation too quickly. Press the alphanu-
meric buttons slowly.

Muffled or "in a well" Reception

This is caused by highly reverberant rooms and people
speaking too far from the microphone.
Speak closer to the console so that the
microphones pick up your speech more
accurately.
► Check that the telephone cable
► If the volume is turned all the
building. Move the SoundStation2™
away from the lights or replace the
florescent bulbs.
Some buttons may not be recognized
if you press them too quickly.
►
SoundStation2™ User Guide - 20
from the interface module is
connected to an analog telephone
(POTS) line.
way down, increase the volume
with the Volume buttons.
Add more sound absorbency to
the room.