Phone System - Polycom SoundStation2 User Manual And Administrator Manual

Phone System

Caller ID*
You can configure Caller ID according to the specifica-
tions and standards that pertain to the phone line you
are connecting to. Standards may differ from country
to country. Please refer to Appendix A for additional
information.
1. Press the Menu button, choose
Admin Setup and press the Select
button, enter passcode (if required)
and press the
Choose Phone System using the
Scrolling buttons, and press the
Select button.
2. Choose CallerID from the avail-
able options and press the Select
button.
3. Use the <- and -> soft keys to step
through the available Caller ID
options.
4. Press the
SAVE
Select button to save your entry.
You may press the Exit button to
cancel your entry.
Flash Timing
You can adjust the timing of the Flash delay to 75, 100,
300, or 600 milliseconds.
1. Press the Menu button, choose
Admin Setup and press the Select
button, enter the passcode (if
required) and press the
key. Choose Flash Timing using
the scrolling buttons, and press the
Select button.
2. Choose Flash Timing from the
available options and press the
Select button.
3. Use the <- and -> soft keys to step
through the available Flash Timing
options.
soft key.
ENTER
soft key or the
soft
ENTER
SoundStation2™ Administrator Guide - 28
�����������
��������
������������
��������
��������
��������
*Caller ID is a subscription
service. Check with your local
telephone service provider to de-
termine if this service is available
in your area.
4. Press the
SAVE
changes. You may press the
Exit button to cancel your
selection.
�����������
��������
������������
��������
������������
������
����
soft key to save
����