Using The Chronograph - Nike Triax Elite Manual

Using the Chronograph

CHRONOGRAPH mode will record heart-rate, distance,
pace, lap and total-time data during a run if the components
are in the correct operating position. See page 5, Setup.
Both lap times and total-time are captured simultaneously
when you press the lap button. Follow steps
to use the chronograph.
Press VIEW button at any
time during run to switch
information in main display.
Scroll to
CHRON mode.
Mark Laps
Lap time is the time required
to go once around a track or
through
complete a segment of a run.
and
Mark Total-Time
Lap View
Total time is the time from
the beginning of run up to
the point of mark.
Total-Time View
Heart-Rate View
Distance View
Pace View
18
LAP 1
TOTAL 1
2
Start
Run
Auto-Lap ON
You cannot manually mark laps if the
Auto-Lap feature is ON. See page 20,
Set the Auto-Lap Feature, to turn
the feature ON / OFF.
Mark Lap/Total
You will have 7
seconds to read
lap and total
time before
chronograph
continues.