Using Set Watch Feature - Nike Triax Elite Manual

Using SET WATCH Feature

Numerous watch settings can be controlled using the Triax Elite application. Below is a screenshot of the SET WATCH
window with a brief description of each function. You can enter this window by clicking the SET WATCH button in the
upper left corner of the Calendar Screen. If the USB dock is not connected to your computer, the SET WATCH button
will not appear on screen. If you have a current successful link between the watch and USB dock, the application
will load any new settings to the watch when you save the SET WATCH window.
Enable / Disable
TIME mode
Set time and date for
Time Zone 1
Click SET AS PRIMARY
to show TZ1 or TZ2 in
display
Set time and date for
Time Zone 2
Click USE COMPUTER
TIME to set watch
to computer's time
and date
Use 12- or
24-hour clock
Enable / Disable
audible alarms
Enable / Disable
POWER SAVE and
set POWER SAVE
time frame
NOTE: If you disable any modes in this window by unchecking the
9
mode box, the unchecked modes will not appear on the watch.
Enable / Disable
WORKOUT mode
Enable / DIsable
out-of-zone alarms
Enable / Disable
end-of-step alarms
Enable / Disable
CHRONOGRAPH mode
Enable / Disable
Auto-Lap and
set Auto-Lap distance
Enable / Disable
STATS mode
Select alarm
Set alarm time
Turn alarm ON / OFF
Set pace units
Set distance units
Set heart-rate unit
CALCULATE maximum
heart rate
Save to watch