Link The Watch To The Computer - Nike Triax Elite Manual

Link the Watch to the Computer

Use PC mode to connect the Triax Elite watch to the computer through the USB dock. The watch communicates with the
USB dock as long as they are within 6 feet of each other. Follow steps
The USB dock MUST be connected to the computer before
opening the Triax Elite application. If you have opened the
application before installing the USB dock, shut down the
application and see page 6, Installing Application, USB Dock
and Drivers, to ensure the USB dock is properly attached
to the computer.
Open the Triax Elite application. You will be asked to provide
USER PROFILE information the first time you open the
application. Once you have created a USER PROFILE,
be sure to select the correct profile before linking
the watch to the computer.
Scroll to PC mode.
3
Successful Link
Watch will begin
linking
through to link the watch to the computer.
NOTE: The link has failed if the display reads PC NOT FOUND.
Press START to retry.
NOTE: The WKOUT ACTIVE or CHRONO ACTIVE display
means you must save a workout or run data before
linking to the computer. See page 15, Begin a Workout,
or page 19, Save Run Data.
Once you have established a successful link with your
computer, click the SYNC button at the bottom of the
Calendar window in the application.
The TRANSFER DATA window will open. Run and workout
data is downloaded to the application. Scheduled workouts
are uploaded to the watch.
7