Removing The Optical Disk Drive - NEC Versa M400 PB EasyNoteM5 Disassembly Manual

3. Unscrew the four screws on both sides of the hard disk drive as shown in Fig. 4

Removing the Optical Disk Drive

To remove the ODD, first remove the battery (see
(see Removing the Hard Disk Drive), then perform the following steps:
1. Remove the screws retaining the optical drive connector as shown in Fig. 5
NEC Versa M400/PB EasyNoteM5 M7 Disassembly Manual
Unscrewing the hard disk drive shield screws
Fig. 4
Releasing the optical drive
Fig. 5
Removing the Battery), then the HDD Cover
M3x4 Sliver
M2.5x5 Black
Page 7