NEC Versa M400 PB EasyNoteM5 Disassembly Manual page 19

5. Remove the Side Rubber Covers at the side of the LCD. Release all two screws.
6. Carefully lift up the LCD panel together with the Inverter board and disconnect the power
cable from the Inverter board. Disconnect the inverter connector remaining on the left side of
the inverter board. Put a side the inverter board.
7. Remove the screws on both sides of the LCD panel in order to release the LCD hinges as
shown in Fig. 27
8. Release the speakers at both sides of the LCD back cover as shown in Fig. 28
NEC Versa M400/PB EasyNoteM5 M7 Disassembly Manual
Removing the Side Rubber Covers
Fig. 26
Removing the LCD Panel hinges
Fig. 27
Removing the Speakers
Fig. 28
M2x4 Black
M2x3.5 Black
M2x3.5 Black
Page 19