Removing The Lcd Module - NEC Versa M400 PB EasyNoteM5 Disassembly Manual

Removing the LCD Module

To remove the LCD Module, first remove the Battery (see
Keyboard (see Removing the
1. Disconnect the LCD connectors as shown in Fig. 13
2. Carefully pull the LCD cable upward to release both Hinge Cover as shown in Fig. 14
NEC Versa M400/PB EasyNoteM5 M7 Disassembly Manual
Keyboard) then perform the following steps:
Disconnecting LCD Connector
Fig. 13
Removing the Hinge Covers
Fig. 14
Removing the Battery), remove the
Page 12