Table of Contents
Advertisement
CPU THRM-Throttling
This item allows you to select the CPU THRM-Throttling rate.
Available options are [12.5%], [25.0%], [37.5%], [50.0%], [62.5%],
[75.0%], and [87.5%].
Resume by RTC Alarm
This function is for setting date and time for your computer to boot up.
During Disabled, you cannot use this function. During Enabled, choose
the Date and Time Alarm:
Date(of month) Alarm
Time(hh:mm:ss) Alarm
Note: If you have change the setting, you must let the system boot up
until it goes to the operating system, before this function will work.
POWER ON Function
This function allows you to select the item to power on the system.
Available options are [BUTTON ONLY], [Keyboard 98], [Password],
[Hot Key], [Mouse Left], and [Mouse Right].
KB Power ON Password
Normally, this item is unselectable. To enable this function, choose the
[Password] setting in POWER ON Function. This will allow you to
input the password for the KB power on function.
Hot Key Power ON
If POWER ON Function is set to [Hot Key], then you can assign a hot
key combination in the field for the PS/2 keyboard to power on the system.
Available options are [Ctrl-F1] through [Ctrl-F12].
You can choose which date the
system will boot up. Set to 0, to boot
every day.
You can choose what hour, minute and
second the system will boot up.
3-25
Award
BIOS Setup
®
Advertisement
Table of Contents
