Table of Contents
Advertisement
IPCA Function
This item allows you to set ACPI (Advanced Configuration and Power
Management) function. Available options are [Enabled] and [Disabled].
Default value is [Enabled].
ACPI Standby State
This item allows you to set the ACPI standby state you will use.
Available options are [S1/POS] and [S3/STR]. Default value is [S1/
POS].
S1/POS
S3/STR
Power Management/APM
This category allows you to select the type (or degree) of power saving
and is directly related to the following item Suspend Time Out. There
are three selections for Power Management:
Min. Power Saving
Max. Power Saving
User Defined (default)
MODEM Use IRQ
This determines the IRQ in which the MODEM can use. Available options
are [3], [4], [5], [7], [9], [10], [11], and [NA].
The S1 state is low power state. In this state, no system
context (CPU or chipset) is lost and the hardware
maintains all system context.
The S3 state is a lower power state where the
information of system configuration and open
applications/files is saved to main memory that
remains poweres while most other hardware
components turn off to save energy. The information
stored in memory will be used to restore the system
when an "wake up" event occurs.
Suspend Mode = 1 hr.
Suspend Mode = 1 min.
This allows you to set the power sav
ing mode manually. Available value
are [Disabled], [1 Min], [2 Min], [4 Min],
[8 Min], [12 Min], [20 Min], [30 Min],
[40 Min], and [1 Hour].
3-23
Award
BIOS Setup
®
Advertisement
Table of Contents
