Gate A20 Option; Typematic Rate Setting - MSI 845 PRO4 Manual

Award BIOS Setup
®
Seek Floppy
This function allows the system to check if floppy installed or uninstalled
when booting up the computer. Available options are [Disabled] and
[Enabled]. Default value is [Disabled].
Boot Up Num-Lock LED
This item allows you to set the NumLock status when you boot up your
computer. When you choose from the default of [On], the keypad is
numeric keys; when you choose [Off], the keypad is arrow keys. Available
options are [On] and [Off]. Default value is [On].

Gate A20 Option

This allows you to set the Gate A20 status. When set to [Fast], Gate A20
is controlled by chipset. When set to [Normal], Gate A20 is controlled by
a specific pin from the keyboard controller. Available options are [Fast]
and [Normal]. Default value is [Fast].

Typematic Rate Setting

This item allows you to set the keystrokes repeat rate determined by
keyboard controller. When set to [Enabled], the following two items
Typematic Rate and Typematic Delay can be selected. Available op-
tions are [Disabled] and [Enabled]. Default value is [Disabled].
Typematic Rate (Chars/Sec)
This item allows you to set the number of times a second to repeat a
keystroke when you hold the key down. Available options are [6], [8],
[10], [12], [15], [20], [24], and [30]. Default value is [6].
Typematic Delay (Msec)
This item allows you to set the delay time before the key begins to repeat
the keystroke while holding down the key. Available options are [250],
[500], [750], and [1000]. Default value is [250].
3-11