Power Button Function - MSI MS-6114 Manual

Table of Contents

CHAPTER 3

Power Button Function

During Suspend, if you push the switch one time, the system goes

into suspend mode and if you push it more than 4 seconds, the system will

be turned off. During On/Off, the system will turn off once you push the

switch.

Ring Resume from Soft-Off

During Disabled, the system will ignore any incoming call from the

modem. During Enabled, the system will boot up if there's an incoming call

from the modem.

Note: If you have change the setting, you must let the system boot up until

it goes to the operating system. Then, power off the system. This

function will work the next time you power on.

LAN Resume From Soft-Off

To use this function, you need a LAN add-on card which support

power on functions. It should also support the wake-up on LAN

jumper(JWOL).

RTC Alarm Resume From Soft-Off

This function is for setting the Date, Hour, Minute, and Second for

your computer to boot up. During Disabled, you cannot use this function.

During Enabled, Choose the Date, Hour, Minute, and Second:

RTC Alarm Date

RTC Alarm Hour

RTC Alarm Minute

RTC Alarm Second

Note: If you have change the setting, you must let the system boot up until

it goes to the operating system. Then, power off the system. This

function will work the next time you power on.

Choose which day the system will boot up.

Choose which hour the system will boot up.

Choose which minute the system will boot up.

Choose which second the system will boot up.

3-18

AMI

BIOS USER'S GUIDE

AMI

BIOS USER'S GUIDE

Table of Contents