Table of Contents
Advertisement
Memory Installation Procedures
You can install memory modules in any combination as follows:
Socket
Socket 1
(Bank0 & Bank1)
Socket 2
(Bank2 & Bank3)
Socket 3
(Bank4 & Bank5)
Note: As 845 chipset does not properly support the PC100 memory, it
is strongly recommended to install PC133 DIMMs for the better system
performance and stability. We do not guarantee the system stability when
installing PC100 DIMMs.
Installing DIMM Modules
1. The DIMM slot has 2 Notch Keys "VOLT and DRAM", so the
DIMM memory module can only fit in one direction.
Front View
2. Insert the DIMM memory module vertically into the DIMM slot.
Then push it in.
3. The plastic clip at the side of the DIMM slot will automatically
close.
Memory Module
64MB, 128MB,
256MB, 512MB, 1GB
64MB, 128MB,
256MB, 512MB, 1GB
64MB, 128MB,
256MB, 512MB, 1GB
Total System Memory
DRAM
VOLT
2-7
Hardware Setup
Total Memory
64MB ~ 1GB
64MB ~ 1GB
64MB ~ 1GB
64MB ~ 3GB
Rear View
Advertisement
Table of Contents
