Throttle Slow Clock Ratio; Thermal Slow Clock Ratio; Power Button Function - MSI MS-6309 Manual

Throttle Slow Clock Ratio

This option specifies the speed at which the system clock runs in
power saving states. The settings are expressed as ratio between the normal
CPU clock speed and the CPU clock speed when the computer is in the
power-conserving state.
Display Activity/IRQ 3/IRQ 4/IRQ 5/IRQ 7/IRQ 9/IRQ1 0/
IRQ 11/IRQ 13/IRQ 14/IRQ 15
When set to Monitor, these options enable event monitoring on the
specified hardware interrupt request line. If set to Monitor and the computer
is in a power saving state, AMI
IRQ line. The computer enters the full on power state if any activity occurs.
®
AMI BIOS reloads the Standby and Suspend timeout timers if
activity occurs on the specified IRQ line.

Thermal Slow Clock Ratio

Set the System Thermal to Monitor to be able to choose the clock
ratio.

Power Button Function

During Suspend, if you push the switch once, the system goes
into suspend mode and if you push it more than 4 seconds, the system will
be turned off. During On/Off, the system will turn off once you push the
switch.
®
BIOS watches for activity on the specified
3-14
®