Table of Contents
Advertisement
Chapter 3
Suspend Time Out
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off. Available options are [1 Min], [2 Min], [4
Min], [8 Min], [12 Min], [20 Min], [30 Min], [40 Min], [1 Hour], and
[Disabled].
Power Button Function
This item allows you to set the functoin of pressing the power button.
Available options are [Power Off] and [Suspend].
Wake Up On PME
This item allows you to enable the system to wake up when detecting the
activities of the power management events. Available options are
[Enabled] and [Disabled].
Wake Up On Ring
When set to [Disabled], the system will ignore any incoming call from
the modem. When set to [Enabled], the system will boot up if there's an
incoming call from the modem.
Wake Up On LAN
To use this function, you need a LAN add-on card which support power
on functions. It should also support the wake-up on LAN jumper
(JWOL1).
Enabled
Disabled
USB Wakeup from S3
This item allows the USB devices to wake up the system from S3 sleep
state. S3 is the STR (Suspend to RAM) mode for ACPI, which saves
different amount of system power. Available options are [Enabled] and
[Disabled].
Wake up on LAN supported.
Wake up on LAN not supported.
3-24
Advertisement
Table of Contents
