2.7 Scan to E-Mail Function
2.7.1 Setting the Controller
To perform mail transmission, enter the settings for accessing the mail server
(SMTP server).
1.
Show the setup screen from the controller operation panel.
2.
Select [Network Setup] — [Service Setup] — [E-Mail Setup] and enter
the following settings.
[Enable E-mail Services]:
[Outgoing Server]:
[Time Out (sec)]:
[Maximum Scan File Size]:
2.7.2 Retrieving Mails
To retrieve mails transferred to the mail server, you must access and retrieve
the mail using the mail client computer.
For details on the operation of your mail client software, see the manual or
help provided with the software program.
2-16
Select "Yes".
Enter the IP address of the mail server (SMTP).
Set the timeout value for accessing the mail server.
Unless there is a specific reason to do so, use the
default value.
Set the maximum transmission mail size.