2.11 Hold Period of the Image Data
If the number of image data files held in the controller HDD keeps increasing,
there is a possibility that the disk becomes full. You can set the hold period of
the image data in the HDD by carrying out the following settings.
Note
Cases in which the image data is held in the HDD
• When using Scan to Mailbox
The image data is transferred to the HDD and held in the Mailbox
created in the HDD.
1.
Show the setup screen from the controller operation panel.
2.
Select [Server Setup] and enter the following settings.
[Clear Each Scan Job]:
Settings
2.11 Hold Period of the Image Data
Select the hold period. The image data is automatically
cleared when the hold period elapses.
After 1 day, Now, Manually, After 1week
2-29