Igmp Member Port Configuration - Enterasys VH-2402S Management Manual

IGMP Member Port Configuration

You can use the IGMP Member Port Configuration screen to assign ports
that are attached to hosts who want to receive a specific multicast service.
Unit Dynamic IGMP Member Port List
-----------------------------------------------------------------------------------------------------------
1
VID
Multicast IP :
[Show]
Figure 2-43. IGMP Member Port Configuration
Parameter
Unit
Dynamic IGMP
Member Port List
Static IGMP Member
Port List
VID
Multicast IP
[Show]
[More]
[Add]
[Delete]
56 VH-2402S User Interface
Vertical Horizon Local Management -- VH-2402S
IGMP Member Port Configuration
:
Unit : 1 Port : 1
[More] [Add]
<OK> <PREV UNIT>
Use <TAB> or arrow keys to move. <Enter> to select
Description
The stack unit ID.
A list of the switch ports that have been automatically configured
as being attached to a IGMP host.
A list of the switch ports that have been manually configured as
being attached to a IGMP host.
The VLAN ID number used to sort the list.
The IP address for a specific multicast service that is used to sort
the list.
Displays settings for the specified VLAN ID and stack unit.
Displays consecutively numbered stack units.
Adds a new host port to the current list.
Removes a host port from the current list.
Static IGMP Member Port List
[Delete]
<NEXT UNIT>
VH-2402S