Configuring Community Names - Enterasys VH-2402S Management Manual

Configuring Community Names

The following figure and table describe how to configure the community
strings authorized for management access. Up to 5 community names
may be entered.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Community Name
Access
Status
Note: The default community strings are "public" with Read Only access, and
"private" with Read/Write access.
9033645-01
Vertical Horizon Local Management -- VH-2402S
SNMP Configuration : SNMP Communities
Community Name
1. public
2. private
3.
4.
5.
<APPLY> <OK>
Figure 2-13. SNMP Communities
Description
A community entry authorized for management access.
Maximum string length : 20 characters
Management access is restricted to Read Only or Read/Write.
Sets administrative status of entry to enabled or disabled.
Access Status
READ ONLY ENABLED
READ/WRITE ENABLED
<CANCEL>
VH-2402S User Interface 21