Configuring The Switch - Enterasys VH-2402S Management Manual

Configuring the Switch

The Device Control menu is used to control a broad range of functions,
including port configuration, Spanning Tree support for redundant
switches, port mirroring, multicast filtering, and Virtual LANs. Each of the
setup screens provided by these configuration menus is described in the
following sections.
Port Configuration ...
Port Information ...
Spanning Tree Configuration ... 802.1Q VLAN Base Information ...
Spanning Tree Information ...
Mirror Port Configuration ...
Port Trunking Configuration ...
IGMP Configuration ...
BStorm Control Configuration ... Static Multicast Router Port Cfg ...
Port GARP Configuration ...
Port GMRP Configuration ...
Selection
Port Configuration
Port Information
Spanning Tree
Configuration
Spanning Tree
Information
Mirror Port
Configuration
Port Trunking
Configuration
IGMP Configuration
BStorm Control
Configuration
Port GARP
Configuration*
Port GMRP
Configuration*
Extended Bridge
Configuration
802.1P Configuration Configures default port priorities and queue assignments.
9033645-01
Vertical Horizon Local Management -- VH-2402S
Device Control Menu
Extended Bridge Configuration ...
802.1P Configuration ...
802.1Q VLAN Current Table Information ...
802.1Q VLAN Static Table Configuration ...
Port Assigment VLAN Configuration ...
Multicast Router Port Information ...
IGMP Member Port Configuration ...
Port Security Configuration ...
Use <TAB> or arrow keys to move. <Enter> to select.
Figure 2-19. Device Control Menu
Description
Sets communication parameters for ports.
Displays current port settings and port status.
Configures the switch, its ports and modules to participate in a
local Spanning Tree.
Displays the current Spanning Tree configuration for the switch,
its ports and modules.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Configures IGMP multicast filtering.
Allows you to enable broadcast storm control and set the packet-
per-second threshold.
Configures generic attribute settings used in the spanning tree
protocol, VLAN registration, multicast filtering.
Configures GMRP multicast filtering.
Displays/configures extended bridge capabilities provided by this
switch, including support for traffic classes, and VLAN extensions.
<OK>
VH-2402S User Interface 27