Dram Simm Replacement Procedure - Enterasys Gold Distributed Forwarding Engine 4G4205-72 Hardware Installation Manual

DRAM SIMM Replacement Procedure

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive
electronic equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones
de seguridad para evitar descargas de electricidad estática.
After you have removed the safety cover as described in "Removing the Safety Cover" on
page B‐5, proceed to "Removing the Network Expansion Module (NEM)" or to
"Removing the DRAM SIMM".
Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive
electronic equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones
de seguridad para evitar descargas de electricidad estática.
Note:
DIMM replacement procedures apply to both DFE modules.
Removing the Network Expansion Module (NEM)
Refer to Figure
1. Attach the antistatic wrist strap (refer to the instructions on the antistatic wrist strap
package).
"Removing the DRAM SIMM"
B‐4 and proceed as follows:
Enterasys Matrix DFE-Gold Series PoE Module Hardware Installation Guide B-7
Gaining Access to Memory Modules
applies only to the 4G4285-49, but the rest of the