Memory Locations and Replacement Procedures
Installing the DIMM
To install a DIMM, refer to Figure
1.
Insert the DIMM down between the connector fingers.
2.
Pivot the DIMM downward so the tabs on the connector arms align with the two
DIMM alignment notches. With the two connector arms spread outward, push the
DIMM down between the connector arms. Then release the two connector arms to
lock the DIMM into place.
Figure B-4
1 DIMM
2 Connector fingers
3.
Replace the chassis cover by re‐attaching the provided screws.
B-6 Mode Switch Bank Settings and Optional Installations
B‐4 and proceed as follows:
Installing the DIMM
Â
Ã
Á
Â
3 Connector arms
4 SIMM alignment notches (2)
Ã