C2Rps-Chas2 Chassis; Securestack C2Rps-Chas2 (Front View Without Psm); Securestack C2Rps-Chas2 (Front View With Two Psms); Securestack C2Rps-Chas2 (Rear View With Two Psms) - Enterasys SecureStack C2RPS-CHAS2 Installation Manual

Enterasys networks redundant power supply chassis installation guide

Table of Contents

C2RPS-CHAS2 Chassis

The chassis is a two‐slot frame without AC power connections or electronics. The chassis

can be installed in a standard 19‐inch rack and populated with one or two PSMs. Each

PSM operates independently. Figure

PSMs. Figure 1‐2 and Figure

chassis.

Figure 1-1

_______________________________________________________________________________

Figure 1-2

_______________________________________________________________________________

Figure 1-3

_______________________________________________________________________________

1-2 Introduction

1‐3 show the front and rear views of a fully populated

1‐1 shows the front view of the chassis without

Table of Contents

Do you have a question about the SecureStack C2RPS-CHAS2 and is the answer not in the manual?

Securestack c2 c2rps-chas2